Radilon® A ECP3808 339 NER
Polyamide 66
PA66 30% mineral filled injection moulding grade. Toughened. Black colour
Suitable for parts requiring improved impact strength along with surface planarity.
ISO 1043 : PA66-I-MD30
Filler / Reinforcement | |
Features | - Filled，Good Impact Resistance
|
RoHS Compliance | |
Appearance | |
Processing Method | |
Resin ID (ISO 1043) | |
Density | 1.32 | -- | g/cm³ | ISO 1183 |
Water Absorption |
|
|
| ISO 62 |
Saturation, 73°F, 0.0787 in | 5.8 | -- | % |
|
Equilibrium, 73°F, 0.0787 in, 50% RH | 1.8 | -- | % |
|
Tensile Modulus | 442000 | 225000 | psi | ISO 527-2/1A/1 |
Tensile Stress |
|
|
| ISO 527-2/1A/5 |
Yield | -- | 5080 | psi |
|
Break | 7980 | -- | psi |
|
Tensile Strain |
|
|
| ISO 527-2/1A/5 |
Yield | -- | 19 | % |
|
Break | 10 | -- | % |
|
Nominal Tensile Strain at Break | -- | 35 | % | ISO 527-2/1A/5 |
Flexural Modulus 2 | 406000 | -- | psi | ISO 178 |
Flexural Stress 2 | 12300 | -- | psi | ISO 178 |
Charpy Notched Impact Strength |
|
|
| ISO 179/1eA |
-22°F | 2.1 | 2.4 | ft·lb/in² |
|
73°F | 3.1 | 3.8 | ft·lb/in² |
|
Charpy Unnotched Impact Strength |
|
|
| ISO 179/1eU |
-22°F | 29 | 31 | ft·lb/in² |
|
73°F | 33 | 38 | ft·lb/in² |
|
Heat Deflection Temperature |
|
|
|
|
66 psi, Unannealed | 302 | -- | °F | ISO 75-2/Bf |
264 psi, Unannealed | 149 | -- | °F | ISO 75-2/Af |
Vicat Softening Temperature | 437 | -- | °F | ISO 306/B50 |
Melting Temperature | 500 | -- | °F | ISO 11357 |
Surface Resistivity | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
Comparative Tracking Index | 550 | -- | V | IEC 60112 |
Burning Rate | < 0.39 | -- | in/min | FMVSS 302 |
Flame Rating (0.031 in) | HB | -- |
| UL 94 |
Glow Wire Flammability Index (0.08 in) | 1290 | -- | °F | IEC 60695-2-12 |
Drying Temperature - Desiccant Dryer | 176 | °F |
|
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr |
|
Dew Point - Desiccant Dryer | < -4 | °F |
|
Suggested Max Moisture | 0.15 | % |
|
Processing (Melt) Temp | 536 to 572 | °F |
|
Mold Temperature | 176 to 212 | °F |
|
Injection Rate | Moderate-Fast |
|
|
