Radilon® A HS 164 NAT
Polyamide 66
PA66 injection moulding grade. Internally lubricated. Fast cycling. Natural colour.
General purpose grade, suitable for parts requiring high productivity like fasteners, connectors, cable ties.
ISO 1043 : PA66
Features | - Fast Molding Cycle，General Purpose，Lubricated
|
Uses | - Connectors，Fasteners，Wire & Cable Applications
|
RoHS Compliance | |
UL File Number | |
Appearance | |
Processing Method | |
Resin ID (ISO 1043) | |
Density | 1.14 | -- | g/cm³ | ISO 1183 |
Molding Shrinkage 3 |
|
|
| ISO 294-4 |
Across Flow | 1.9 | -- | % |
|
Flow | 1.8 | -- | % |
|
Water Absorption |
|
|
| ISO 62 |
Saturation, 73°F, 0.0787 in | 8.9 | -- | % |
|
Equilibrium, 73°F, 0.0787 in, 50% RH | 2.1 | -- | % |
|
Tensile Modulus | 450000 | 189000 | psi | ISO 527-2/1A/1 |
Tensile Stress (Yield) | 12300 | 7980 | psi | ISO 527-2/1A/50 |
Tensile Strain (Yield) | 4.5 | 30 | % | ISO 527-2/1A/50 |
Nominal Tensile Strain at Break | 35 | > 50 | % | ISO 527-2/1A/50 |
Flexural Modulus 4 | 421000 | -- | psi | ISO 178 |
Flexural Stress 4 | 16000 | -- | psi | ISO 178 |
Charpy Notched Impact Strength |
|
|
| ISO 179/1eA |
-22°F | 2.1 | -- | ft·lb/in² |
|
73°F | 2.9 | 7.1 | ft·lb/in² |
|
Charpy Unnotched Impact Strength(73°F) | No Break | -- |
| ISO 179/1eU |
Heat Deflection Temperature |
|
|
|
|
66 psi, Unannealed | 392 | -- | °F | ISO 75-2/Bf |
264 psi, Unannealed | 158 | -- | °F | ISO 75-2/Af |
Vicat Softening Temperature | 464 | -- | °F | ISO 306/B50 |
Melting Temperature 5 | 500 | -- | °F | ISO 11357 |
Surface Resistivity | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
Comparative Tracking Index | 600 | -- | V | IEC 60112 |
Burning Rate | 0.0 | -- | in/min | FMVSS 302 |
Flame Rating |
|
|
| UL 94 |
0.016 in | V-2 | -- |
|
|
0.031 in | V-2 | -- |
|
|
Glow Wire Flammability Index |
|
|
| IEC 60695-2-12 |
0.04 in | 1380 | -- | °F |
|
0.08 in | 1470 | -- | °F |
|
Drying Temperature - Desiccant Dryer | 176 | °F |
|
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr |
|
Dew Point - Desiccant Dryer | < -4 | °F |
|
Suggested Max Moisture | 0.15 | % |
|
Processing (Melt) Temp | 518 to 554 | °F |
|
Mold Temperature | 158 to 194 | °F |
|
Injection Rate | Moderate |
|
|
