Shanghai Langqi Plastic Materials Co., Ltd.

Ultramid® B3EG5

Manufacturer: BASF
Produced At: Europe / China
Product Category: Polyamide 6（PA6）
Product No: Ultramid B3EG5
Product Quantity: 25KG / BAG
Product Features: Oil Resistant

Product information

Ultramid® B3EG5

Polyamide 6

BASF Corporation

Product Description:

Glass fibre reinforced injection moulding grade for industrial articles and electrical insulating parts.

Filler / Reinforcement	Glass Fiber, 25% Filler by Weight
Features	Oil Resistant
Uses	Electronic Insulation、Industrial Parts
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density	1.32	--	g/cm³	ISO 1183
Apparent (Bulk) Density	0.70	--	g/cm³
Melt Volume-Flow Rate (MVR)(275°C/5.0 kg)	2.75	--	in³/10min	ISO 1133
Water Absorption				ISO 62
Saturation, 73°F	6.8 to 7.4	--	%
Equilibrium, 73°F, 50% RH	2.1 to 2.5	--	%
Viscosity Number (96% H2SO4 (Sulphuric Acid))	140	--	cm³/g	ISO 307
Mold Shrinkage - constrained 3	0.35	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	1.16E+6	798000	psi	ISO 527-2
Tensile Stress (Break)	23200	15200	psi	ISO 527-2
Tensile Strain (Break)	3.5	8.5	%	ISO 527-2
Tensile Creep Modulus 4 (1000 hr)	435000	--	psi	ISO 899-1
Flexural Modulus	1.07E+6	609000	psi	ISO 178
Flexural Stress	31900	21800	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	4.8	--	ft·lb/in²
73°F	5.7	12	ft·lb/in²
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	36	--	ft·lb/in²
73°F	38	50	ft·lb/in²
Notched Izod Impact Strength(73°F)	5.7	8.1	ft·lb/in²	ISO 180/A

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	428	--	°F	ISO 75-2/B
264 psi, Unannealed	410	--	°F	ISO 75-2/A
Melting Temperature	428	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow : 73 to 176°F	1.1E-5 to 1.4E-5	--	in/in/°F
Transverse : 73 to 176°F	3.3E-5 to 3.9E-5	--	in/in/°F
Specific Heat	0.359	--	Btu/lb/°F
Thermal Conductivity	2.4	--	Btu·in/hr/ft²/°F	DIN 52612
Maximum Service Temperature - short cycle operation	392	--	°F
Temperature Index - at 50% loss of tensile strength				IEC 60216
-- 5	329	--	°F
-- 6	275	--	°F

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	1.0E+10	--	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Relative Permittivity (1 MHz)	3.80	7.00		IEC 60250
Dissipation Factor (1 MHz)	0.025	0.24		IEC 60250
Comparative Tracking Index(Solution A)	575	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification (0.06 in)	HB	--		IEC 60695-11-10, -20
Halogen Content	< 100	--	mg/kg	Internal Method

Additional Information	Dry	Conditioned
Polymer Abbreviation	PA6-GF25	--

Products

Products

Ultramid® B3EG5

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service